Software Downloads
Download the latest software applications for use with your Uniblitz optical and/or laser shutter systems below.
| Uniblitz LabVIEW Driver | |
|---|---|
| Uniblitz LabVIEW Driver by Sixclear A simple yet powerful driver that will give you complete control over your Uniblitz shutter device from LabVIEW. The example code that ships with the driver exposes every Uniblitz operation available, and is ready to run. (Author: Sixclear) |
Download |
| Archived Software Applications | |
|---|---|
| Trade Show Demo Visual Basic program to operate two daisy chained VMM-D3 controllers. File supports COM1 and operates at 9600 baud. Address settings for unit one “0,” for unit two “1.” Once extracted, user runs a set up program to install all files including executable demo, source code, and updated COM drivers. The source program can be viewed and modified as required. This will require a Visual Basic (ver 6.0 or higher) compiler and editor. Visual Basic compiler is not required to run and operate the Trade Show Demo program only to view and modify source code. File packaged as a ZIP file – tradeshowdemo.zip. Extract the file and run the application. (Author: Vincent Associates) |
Download |
| VMM-D1 Interface Visual Basic program to operate VMM-D1 controllers. File supports COM1 and operates at 9600 baud. Units can be operated in a daisy chain configuration and each unit’s address can be selected. Once extracted, user runs a set up program to install all files including executable demo, source code, and updated COM drivers. The source program can be viewed and modified as required. This will require a Visual Basic (ver 6.0 or higher) compiler and editor. Visual Basic compiler is not required to run and operate the VMM-D1 Interface program only to view and modify source code. File packaged as a ZIP file – vmm-d1_interface.zip. Extract the file and run the application. (Author: Vincent Associates) |
Download |
| VCM-D1 LabVIEW Controller Application LabVIEW program for use with the VCM-D1, VMM-D1, VMM-T1, VDM1000, and VDM1000B shutter controllers. The software communicates serially at 9600 baud with RS232 port of individual controller unit. Does not support extended commands for channels 2 and 3 of VMM-D3 controller, but can be modified as needed. Compatible with LabVIEW 7.0 or higher. File packaged as a ZIP file – Uniblitz-labview.zip. Extract the LabView library file “Uniblitz1b.llb” and run the application. (Author: Vincent Associates) |
Download |
| VMM-D1 Drive Controller Test Program Turbo C++ program written as a test program for the VMM-D1/T1 drive controllers. File supports COM1 and operates at 9600 baud. This program can be run directly from Turbo C++ compiler only. The .cpp file can be viewed and edited from any text editor. This program can be modified and utilized as required. Supports Borland Turbo C++ Lite. File packaged as a ZIP file – vmmd1t1.zip. Extract the file and run the application. (Author: Vincent Associates) |
Download |
| VMM-D1 Drive Controllers Quick Basic program written as a test program for the VMM-D1/T1 drive controllers. This is the same program that is listed in the VMM-D1/T1 User Manual pages 31-32. .exe file supports COM1 and operates at 9600 baud. .bas file is the .exe source code and can be modified with text editor as needed. Supports Quick Basic version 4.5 or higher. File packaged as a ZIP file – rs232vmm.zip. Extract the file and run the application. (Author: Vincent Associates) |
Download |
| VMM-D3 Drive Controller Test Program Quick Basic program written as a test program for the VMM-D3 drive controller. .exe file supports COM1 and operates at 9600 baud. .bas file is the .exe source code and can be modified with text editor as needed. Supports Quick Basic version 4.5 or higher. File packaged as a ZIP file – rs232vm3.zip. Extract the file and run the application. (Author: Vincent Associates) |
Download |
| VMM-D3 Three Channel Drive Controller Test Program Turbo C++ program written as a test program for the VMM-D3, three channel drive controller. File supports COM1 and operates at 9600 baud. This program can be run directly from Turbo C++ compiler only. The .cpp file can be viewed and edited from any text editor. This program can be modified and utilized as required. Supports Borland Turbo C++ Lite. File packaged as a ZIP file – vmmd3.zip. Extract the file and run the application. (Author: Vincent Associates) |
Download |
While Vincent Associates makes every attempt to provide stable software for your use, we are not responsible for any software authored by those not affiliated with Vincent Associates.
Contact Us
For software-related questions, please do not hesitate to contact us.