Drive Units :: Uniblitz

DRIVE UNITS

Electronic shutter drivers and timers are available in both standard and custom units. Please choose a model from the list at the left of this page for specific product information. If you are unsure of the driver system you require for your application, please review the comparison chart below or contact Vincent Associates Technical Support at support@uniblitz.com or talk to a Technical Representative at (800) 828-6972 x112 (Steve Pasquarella), x113 (Richard St. Louis), or x115 (Adam Lamb)

BENCH SYSTEMS OVERVIEW

VDM1000 N-CAS® Drive Controller	VCM - D1 Single Channel Shutter Driver CE/UL/CSA Certified	VMM - D3 Three Channel Shutter Driver
Single Channel Driver External Exposure Control BNC Control Input and Sync Output RS-232C Input - 8 Unique Addresses Available in an OEM version (3U PWA) as the VDM1000B Shutter Interconnect Cable Included	Single Shutter Driver Channel Has Successfully Completed and is Compliant to CE/UL/CSA Standards External Exposure Control BNC Control Inputs and Outputs RS-232C Input and Output via RJ45 Connector - 8 Unique Addresses Key Switch Selection of Interrupt Control Shutter Interconnect Cable Included	Three Shutter Driver Channels in one package External Exposure Control Pluggable Screw Terminal Inputs and Outputs RS-232C Input - 8 Unique Addresses (Can Control Up To 24 Shutters Via One Com Port) Three Shutter Interconnect Cables Included

VMM - D4 Four Channel Shutter Driver	VMM - T1 Single Channel Shutter Driver/Timer
Four Shutter Driver Channels In One Package External Exposure Control Pluggable Screw Terminal Inputs and Outputs Four Shutter Interconnect Cables Included	Single Shutter Driver Channel Internal Exposure Timer and Delay Timer Each Timer Range .1msec - 2.8 hours External Exposure Control BNC Control Inputs and Outputs RS-232C Input - 8 Unique Addresses Shutter Interconnect Cable Included

OEM BOARD LEVEL SYSTEMS OVERVIEW

For OEM applications, printed circuit board level drivers are available from Vincent Associates. Please review the four standard OEM units available in the chart at the left. These OEM driver systems have been used in many different applications and are designed to be powered from user supplied AC or DC voltages. We may have a drop-in design to fit your specific requirement. If not, we can design a shutter driver to your specifications. Please contact our technical representatives for further information regarding these devices or to discuss your particular application in greater detail.